National Hotline:

0755-23714105

All categories

Your current location:

/
/
/
/
RV-C series reducer
72d
72d

RV-C series reducer

The RV-C hollow shaft reducer is equipped with a central through hole and component configuration to achieve greater design flexibility and space saving.

● Backlash less than 1 arc-minute;
● Hollow shaft through hole (up to 5" in diameter) saves space;
● Installation of auxiliary motor into the hollow shaft;
● Strong torsional rigidity and compact size;
● Part style realizes more design flexibility;
● Integrated angular bearing with greater thrust and cantilever momentum;
● Higher available ratio (up to 400:1) and does not increase the size of the reducer;
● Maximum torque to 5X rated torque (emergency stop);
● RV-C hollow shaft reducer is equipped with a central through hole and component configuration to achieve greater design flexibility and space saving. The component contains rolling contact components to achieve high efficiency, long service life and minimal backlash. At the same time, an eccentric second-stage deceleration is designed to increase the reduction ratio selection while reducing vibration and inertia. The reducer is also equipped with a set of large internal angle bearings to achieve greater load capacity and reduce the need for external support equipment-thereby reducing design time and installation costs.
● Longer service life and reliability

● Nabtesco reducer includes a patented two-stage reduction design, which can provide greater torque, and provide high reduction ratio and high impact load resistance under the premise of ensuring high precision and light weight. RV uses the unique pin teeth and RV gear structure of the cycloidal design of rolling contact parts to reduce wear, prolong service life, and reduce backlash, making it more resistant to impact than traditional reducers, and further reducing backlash. The reducer is also equipped with a set of large internal angle bearings to achieve greater load capacity in order to reduce the need for external support equipment-thereby reducing design time and installation costs.

● The actual symmetrical gear design and all shafts supported by ball bearings guarantee constant performance during the service life and allow the peak value to reach 5 times the rated torque in a short period of time (for example, during an emergency stop).

Quantity
-
+
Stock:
0
1
Product description

Output speed 5~25

 

Output speed(r/min)
5
10
15
20
25
Model
The speed ratio of the reducer unit
Output torque
Input power
Output torque
Input power
Output torque
Input power
Output torque
Input power
Output torque
Input power
(R1) Comment 1
Nm(kgf-m)
kW
Nm(kgf-m)
kW
Nm(kgf-m)
kW
Nm(kgf-m)
kW
Nm(kgf-m)
kW
RV-10C
27
136(13.9)
0.09
111(11.3)
0.16
98(10)
0.21
90(9.17)
0.25
84(8.58)
0.29
RV-27C
36.57(1,390/38)
368(37.5)
0.26
299(30.5)
0.42
265(27)
0.55
243(24.8)
0.68
227(23.2)
0.79
RV-50C
32.54(1.985/61)
681(69.5)
0.48
554(56.5)
0.77
490(50)
1.03
450(45.9)
1.26
420(42.9)
1.47
RV-100C
36.75
1,362(139)
0.95
1,107(113)
1.55
980(100)
2.05
899(91.7)
2.51
841(85.8)
2.94
RV-200C
34.86(1,499/43)
2,724(278)
1.90
2,215(226)
3.09
1,961(200)
4.11
1,803(184)
5.04
1,686(172)
5.88
RV-320C
35.61(2,778/78)
4,361(445)
3.04
3,538(361)
4.94
3,136(320)
6.57
2,881(294)
8.05
2,690(275)
9.41
RV-500C
37.34
6,811(695)
4.75
5,537(56.5)
7.73
4,900(500)
10.26
4,498(459)
12.56
 
 

 

● Output speed 30~60, torque rigidity standard value, allowable torque, instantaneous maximum allowable torque, allowable maximum output speed

 

Output speed
(r/min)
5
10
15
20
Moment rigidity standard value
Allowable moment
Maximum instantaneous allowable moment
Maximum allowable output speed
Model
Output torque
Input power
Output torque
Input power
Output torque
Input power
Output torque
Input power
Nm(kgf-m)
kW
Nm(kgf-m)
kW
Nm(kgf-m)
kW
Nm(kgf-m)
kW
Nm/arc.min.
(kgf-m/arc.min.)
Nm(kgf-m)
Nm(kgf-m)
r/min
RV-10C
80(8.12)
0.34
73(7.45)
0.41
68(6.97)
0.47
65(6.60)
0.54
421(43)
686(70)
1,372(140)
80
RV-27C
215(21.9)
0.90
197(20.1)
1.10
184(18.8)
1.29
174(17.8)
1.46
1,068(109)
980(100)
1,960(200)
60
RV-50C
398(40.6)
1.67
366(37.3)
2.04
341(34.8)
2.38
 
 
1,960(200)
1,764(180)
3,528(360)
50
RV-100C
796(81.2)
3.33
730(74.5)
4.08
 
 
 
 
2,813(287)
2,450(250)
4,900(500)
40
RV-200C
1,597(163)
6.69
 
 
 
 
 
 
9,800(1,000)
8,820(900)
17,640(1,800)
30
RV-320C
 
 
 
 
 
 
 
 
12,740(1,300)
20,580(2,100)
39,200(4,000)
25
RV-500C
 
 
 
 
 
 
 
 
24,500(2,500)
34,300(3,500)
78,400(8,000)
20

Output speed 5~25/output speed 30~60/other

 

● Others (allowable torque at start and stop, instantaneous maximum allowable torque, etc.)

 

Model
Allowable torque at start and stop
Maximum instantaneous allowable torque
Idling
Single spring constant reducer
Moment of inertia I (I=GD²/4)
Reducer monomer
Moment of inertia I (I=GD²/4)
Standard Sentako
weight
(Deceleration unit)
Nm(kgf-m)
Nm
(kgf-m)
MAX.arc.min.
Nm/arc.min.
(kgf-m/arc.min.)
Kg-m²
Kg-m²
Kg
RV-10C
245(25)
490(50)
1
47(4.8)
1.34×10-5
0.678×10-3
4.6
RV-27C
662(67.5)
1,323(135)
1
147(15)
0.628×10-4
0.563×10-3
8.5
RV-50C
1,225(125)
Bolt fastening
2,450(250)
1
255(26)
1.82×10-4
0.363×10-2
 
15
Standard bolt fastening
1,960(200)
RV-100C
2,450(250)
Bolt fastening
4,900(500)
1
510(52)
0.47×10-3
0.953×10-2
 
19.5
Standard bolt fastening
3,430(350)
RV-200
4,900(500)
Bolt fastening
9,800(1,000)
1
980(100)
0.995×10-3
1.94×10-2
 
57
Standard bolt fastening
7,350(750)
RV-320C
7,840(800)
15,680(1,600)
1
1,960(200)
0.68×10-2
0.405×10-1
80
RV-500C
12,250(1,250)
24,500(2,500)
1
3,430(350)
0.98×10-2
-
160

 

Previous
Next

Recommended Products

HCS series reducer
HCS-I series flexspline is a cup-shaped standard tube structure, and the input shaft is directly matched with the inner hole of the wave generator. Connect by flat key. Generally, the steel wheel end is fixed and the flexible wheel end is output.
HST-I type harmonic
The HST-I series flexspline is a hollow flanged standard tube structure, and the whole machine has a compact structure. The input shaft is directly matched with the inner hole of the wave generator and connected by flat keys. It can be used in the connection mode of rigid wheel end fixed and flexible wheel end output; it can also be used in the connection mode of flexible wheel end fixed and rigid wheel end output.
HST-III hollow reducer
The HST-Ⅲ series flexspline is a hollow flanged standard tube structure. There is a large-diameter hollow shaft hole in the middle of the wave generator cam. The reducer is designed with a supporting bearing and a fully sealed structure. It is easy to install. It is very suitable for the center of the reducer. Use when threading.
HST-V series
HST-IV Shaft input type harmonic reducer
HST-IV series flexspline is a hollow-flanged standard barrel structure. The inner hole of the reducer is designed with support bearings, fully sealed structure, easy to install, shaft input form, suitable for synchronous belt connection and occasions requiring shaft input.
RV-E series reducer
The standard coaxial RV-E reducer has excellent performance in a very compact and high-precision component configuration.
RV-C series reducer
The RV-C hollow shaft reducer is equipped with a central through hole and component configuration to achieve greater design flexibility and space saving.
zsa
youjt
Contact Us

TelTel:0755-23714105 / 13537655857 Mr. Xu

e_mailXS@homwing.com

Add205, Building B, Hangcheng Smart Security Technology Park, Sanwei Community, Hangcheng Street, Baoan District, Shenzhen

Social Media
ewm

gongzhaoWeChat

Scan QR code

About Us

Copyright: Shenzhen Homwing Technology Co., Ltd.URL:www.homwing.com ICP. 17043969Powered by:www.300.cnShenzhen

Online

Tek

Message

WeChat