(1) The transmission speed ratio is large. The HCS series harmonic reducer manufacturer tells you that the single-stage harmonic gear ratio ranges from 70 to 320, and in some units, it can reach 1,000, and the multi-stage gear ratio can reach more than 30,000. It can be used not only for deceleration, but also for acceleration.

(2) High bearing capacity. The HCS series harmonic reducer manufacturer tells you that this is because the number of teeth meshed at the same time in the harmonic gear transmission is large, and the number of teeth meshed at the same time in the dual-wave transmission can reach more than 30% of the total number of teeth, and the flex wheel adopts high-strength materials. There is surface contact between the teeth.
(3) High transmission precision. The HCS series harmonic reducer manufacturer tells you that this is because the number of teeth meshed at the same time in the harmonic gear transmission is large, and the error is averaged, that is, the multi-tooth meshing has a mutual compensation effect on the error, so the transmission accuracy is high. In the case of the same gear accuracy level, the transmission error is only about 1/4 of the ordinary cylindrical gear transmission.
The HCS series harmonic reducer manufacturer tells you that at the same time, a slight change of the radius of the wave generator can be used to increase the deformation of the flexible wheel, so that the backlash is small, and even meshing without backlash can be achieved, so the harmonic gear reducer drive has a small backlash, for reverse rotation.
The above information is the HCS series harmonic reducer manufacturer's introduction and analysis of the main advantages of harmonic gear reducer, hope it helps you.