How does the harmonic reducer solve the noise problem?


Release time:

2022-12-05

How does the harmonic reducer solve the noise problem? The following is how to solve the noise problem of the reducer:

How does the harmonic reducer solve the noise problem? The following is how to solve the noise problem of the reducer:


1. timely lubrication, the correct use of oil
Unreasonable lubrication and the wrong use of lubricating oil will cause immeasurable damage to the reducer. At high speeds, the friction on the gear surface will generate a lot of heat energy. Improper lubrication will cause gear damage, affect accuracy and increase noise. The design requires the gear pair to have appropriate clearance (meshing gear non-working surface clearance to compensate for thermal deformation and store lubricating oil). The correct use and selection of lubricating oil can ensure the safe and effective operation of the system, delay the deterioration trend and stabilize the noise level.
2. correct use
The correct use of the reducer can greatly avoid the damage of the parts and ensure a stable noise level. The noise of the reducer will increase with the increase of the load, so it should be used within the normal load range.
3. regular maintenance
Regular oil change, replacement of worn parts, loose parts of fasteners, removal of internal debris, gearbox cleaning and maintenance machine can use the original oil supply and drainage system and filter old oil to realize gearbox cleaning, waste oil rapid filtration, new oil and other functions, The operation process does not change the hardware facilities, does not add cleaning agents, ensures the safe operation of the gearbox, and prolongs the service life. Adjust the clearance of each component to the standard value, and verify the geometric accuracy.


Combined with the above three points, it can improve the ability of the reducer to resist the deterioration of the noise level and maintain a stable state of use.


Key words:


Previous Page

Next Page

Previous Page:

Next page: